CETO AIO

Data sheet

More info

Name: CETO AIO
Size: 78 x 44 x 26mm
Resistance range: 0.1~3.0ohm
Output Voltage: 1~8.0V
Output Power: 5~80W
Protections: Overtime Protection: 10s / Short-circuit Protection / Overcharge Protection / Max Power Protection / Output Over-current Protection / Low Battery Protection / Overtemperature Protection
Frame opening design (3-side intake.3-side window)
Exposed battery design, beautiful, personality, easy to disassemble, perfect support 18650 battery (not included)
Better compatibility with BORO RBA / Tanks
SDI80 Chipset:
1. Output bursts strongly without delay.
2. Can accurately identify the resistance value of the heating wire, and calculate the best stable output power through the chip, which will continue to bring you the ultimate wonderful taste experience.
3. With intelligent security protection function, the use of more assured.

OPERATION / CONTROLS:
Switch ON / OFF: Press the power key five times to switch on or off, and "SYSTEM OFF" will be displayed when it is shut down.
Screen flip: Press the POWER button three times, and the screen display will flip 180 degrees.
Power adjustment: Press the UP button And DOWN button to adjust the power, the maximum power is 80W.
Key lock: Press and hold the up and down keys for 3 seconds to lock and UNLOCK the keys, The lock state is POWER LOCKED, and the UNLOCK state is POWER UNLOCK. When the keys are LOCKED, POWER LOCKED is displayed when you press keys, prompting you to unlock to adjust the power. The button lock function is only effective for the button and does not affect the use of the ignition key.
Record smoking times: The device will automatically record the number of smoking and display it on the screen, while holding down the ignition key and the reduction key to clear the value.
How to smoke: Long press the POWER button to make the nebulizer start to work, release the POWER button will stop the nebulizer work, the maximum heating time is 10S,more than 10S the device will automatically stop output.

INTELLIGENT PROTECTION FUNCTIONS AND TIPS:
A. Load short-circuit protection: LOW RES
B. LOW load resistance Protection: LOW RES
C. Overload resistance protection: NO ATOMIZER
D. Overheat protection: When the internal temperature of the circuit rises, it will prompt "TOO HOT WARNING!" Wait for the temperature to drop before continuing to use.
E. Battery reverse protection: although it will not damage the product, it cannot be turned on.
F. LOW BATTERY voltage protection: When the battery voltage is lower than 3.3V, any discharge operation is prohibited, and "Low Battery" is displayed.
G. Battery overvoltage protection: When an abnormal POWER supply greater than 4.3V is detected, HIGH VOLTAGE is displayed when you press the Power key. If the low-voltage situation is caused by long-term high-power continuous discharge, the release will stop and remind the "LOW BATTERY".